We East Inflatables provide each inflatable product with a set of accessories, including: repair kits and glue.


When you find your inflatable water slide has a hole, don’t worry, just fix it by using our repair kits and glue. With these instructions, you can repair any hole in the inflatable water slide, and you'll be out in the summer sun.


1 find the hole in the bouncing castle and spray it where you think it might be soapy water. If the water slide is inflated, soap bubbles will appear at the hole.

2 clean the area around the hole with a clean cloth and dry thoroughly. Estimate the size of the patch you need.

3. Cut that vinyl to the right size.

4 after the material has dried, apply adhesive around the hole and the edge of the vinyl patch.

5 connect the patch to the spring piece and apply pressure until the adhesive dries. The best way is to use a heavy object, such as a heavy book, or press a heavy spoon in the leak repair area for a few minutes to ensure that the adhesive really holds with the watertight seal.


Written by Candy from East Inflatables.